This LOTOS LTP6300DCNC plasma cutter got the job done! Very fast and easy to setup, and included everything needed to be up and running in minutes. It cuts very well, making easy work of some scrap steel I had laying around to test on. The unit is very powerful for as compact and light weight as it is, and this one seems well built. While there are cheaper machines avaliable, this one is a solid performer.

The media could not be loaded.

LTP6300DCNC | 63A CNC-Enabled Plasma Cutter, Drag-Cut Enables, Non-HF Blowback Pilot Arc, 3/4" Clean (1" Sever), THC/ARC OK, Dual-Voltage 110/220V, LED Controls, Portable Air Plasma CutteTest this plasma cutter on a dirty 1 inch round bar, which it cut easily. Pictures included with review. The unit is compact with a very easy-to-read display panel. Easy to make adjustments to the settings. The manual leaves a lot to be desired, but if you are familiar with metalworking equipment, it is not hard to figure out. I like that it comes with a proper air compressor fitting for the U.S., so no adaptors need to be purchased, or the connectors refitted. The torch handle is of nice quality, and the torch lead is longer than others. Unfortunately, my CNC is out of service so I could not test the CNC integration, but the cutter overall is very nice and works well. I will update the review if it fails to perform after I use it with CNC. II used a 50 220v supply for my test.

This is my third LOTOS plasma cutter, and they've all been reliable and straightforward to operate. The 63A output is plenty for cutting through thinner stainless steel gauges without slowing down, and on mild steel it handles everything I've thrown at it cleanly. The standout feature on this model is the non-HF (high-frequency) pilot arc start, if you're planning to connect to a CNC table, non-HF is essential because HF starts interfere with CNC electronics.My other 2 lotos cutters were really big and heavy. one had the built in compressor, and the other was 85A, so i was pleasantly surprised at how small and light this one was.Drag-cut capability makes freehand work on sheet metal much easier since you can rest the torch right on the workpiece. LOTOS customer support has been responsive and helpful across multiple interactions over the years, which matters when you're running a machine that sees regular use.this might seem a little expensive compared to some of the other cheaper cutters on the market, but when you factor in the included features like non-hf start and lotos excellent customer support, i think its worth the money.

Works good cnc plug instructions where not translated to good but not hard to figure out

It is a great little plasma cutter that is CNC capable but don't expect to find the torch for the CNC application on Amazon. It has it listed as dual voltage but comes only with the 220 Volt plug and no adapter to 110 Volts. I never use them on 110 V but when they say its dual voltage you would expect an adapter. It operates well, cuts well, looks great and is nice and portable. This model is very easy to use, and is priced quite well for a plasma cutter that will cut up to 1" in severe cases. The consumables are pricey and you have to buy them from LOTOS to maintain warranty. The instruction manual could be better but all things considered it is what I expected. It will do the job of machines that are twice the price. Durability will take the test of time to determine.